42
Setting
Remote control
This projector provides two different remote control codes;
the factory-set, initial code (Code 1) and the secondary code
(Code 2). This switching function prevents remote control
interference when operating several projectors or video
equipment at the same time.
When operating the projector in “Code 2”, both the
projector and the remote control must be switched to
“Code2”.
To change the code for the projector;
Select either “Code 1” or “Code 2” in this Setting Menu.
To change the code for the remote control;
Press and hold both the MENU and IMAGE buttons
together for 10 seconds or more. After changing the
code, make sure the remote control operates properly.
Remote control
Lamp mode
This function allows you to change brightness of the
screen.
Normal···· normal brightness
Auto···· the controlled brightness according with
input signal
Eco1···· higher brightness than Eco2
Eco2···· lower brightness reduces the lamp power
consumption
Key lock
If the top control accidentally becomes locked and you do
not have the remote control nearby, disconnect the AC
power cord from the AC outlet, and then while pressing the
SELECT button, reinsert the AC power cord. This will
release the top control lock.
Key lock
Select Key lock
and this box
appears. Choose
one of these with
the Point
ed
buttons and
select [Yes] to
activate it.
USB
This projector is equipped with the USB port for interactive
operation between the projector and computer. Select
proper and available port.
···· When using the PAGE
ed
buttons on the
remote control unit. (p11)
···· This item is provided for a spare port. Do not try
to connect with selecting this item.
P-TIMER
FREEZE
COMPUTER VIDEO
PAGE
SELECT
D.ZOOM
MUTE
MUTE
VOLUME-
MENU
MENU
NO SHOW
SHOW
IMAGE
IMAGE
KEYSTONE
AUTO PC
ON-OFF
Press and hold
MENU and
IMAGE buttons
for 10 seconds or
more.
This function locks operation of the top control and the remote
control. It is useful to prevent operation by an unauthorized person.
···· not locked.
···· lock operation of the top control. To unlock, use the
remote control.
···· lock operation of the remote control. To unlock, use
the top control.
