24
Choose either Computer 1 or Computer 2 by pressing the
INPUT button on the top control or press the COMPUTER
button on the remote control.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
Press the MENU button to display the On-Screen
Menu. Press the Point
7 8
buttons to move the red
frame pointer to the Input Menu icon.
1
Computer
1
Input Menu
Press the Point
d
button to move the red arrow
pointer to either Computer 1 or Computer 2, and then
press the SELECT button.
2
After the Source Select Menu appeared for Computer
1, move the pointer to RGB and then press the
SELECT button.
3
Input Menu
Computer 1
Video
Computer 2
COMPUTER button
Computer 1
Computer 2
When the input source is analog coming
from a computer through the COMPUTER
IN 1/ COMPONENT IN terminal, select
RGB.
RGB
INPUT button
Input Source Selection
Direct Operation
Menu Operation
Computer Input
Move the pointer to RGB
and press the SELECT
button.
Source Select Menu
✔
Note:
Computer 2 is not displayed when the COMPUTER IN 2/
MONITOR OUT terminal is used as Monitor out. (p41)
Move the pointer (red
arrow) to Computer 1 and
press the SELECT button.
Input Menu icon
Move the pointer (red
arrow) to Computer 2 and
press the SELECT button.
RGB (Scart)
Component
See "Input Source Selection (Component /
RGB-Scart 21-pin )" on p33.
See "Input Source Selection (Component /
RGB-Scart 21-pin )" on p33.
✳
See Note at the bottom of this page.
✳
✳
P-TIMER
FREEZE
COMPUTER VIDEO
PAGE
SELECT
D.ZOOM
MUTE
VOLUME-
MENU
NO SHOW
IMAGE
KEYSTONE
AUTO PC
ON-OFF
ON
-
OFF
POWER
KEYSTONE
INPUT
WARNING
LAMP
REPLACE
V
O
L
U
M
E
–
V
O
L
U
M
E
SELECT
Top Control
COMPUTER button
Remote Control
INPUT button
