Eiki LC-WB42N, Service Manual

Page: 13 / 132

-1-
Mechanical Disassembly
x
Main Board, AV Board, Rear Panel and Fans removal
Main board
Rear panel
E(M2.5x6)
Fig.2
AV board
A (M2.5x6)x5
Side grill
F (Tx6)x2
D (Tx6)(Black)x2
1. Remove 6 screws A(M2.5x6),screw B(M2.5x6) and C(M4x4)to remove the Main board.
2. Remove 2 screws D(Tx6) to remove the AV board and the Rear panel.
. Remove screw E(M2.5x6) to remove the Optical top shield.
4. Remove screw F to remove fans (FN901, FN902) and the Side grill.
FN901
FN902
A (Tx8)
B (Mx8)
FN907
1. Disconnect the lamp ballast socket.
2. Remove screw A(Tx8) and B(Mx8)
to remove fan (FN907)
Fig.3
c
Fan (FN907) removal
Trigger
Trigger
Duct
* Trigger should be mounted as
the figure above.
Ballast
socket
A
A
A
A
D
F
B (M2.5x6)
C (M4x4)
Optical
top shield