—
52
—
DLP Projector — Owner’s Manual
M
aintenance
and
S
ecurity
Replacing the Projection Lens
Perform the following to replace the projection lens:
1.
Center the lens. Use the
Lens H
or
Lens V
button (on the remote control) to adjust the lens at its center
position.
Important:
•
Ensure that the lens is at or near its center position.
•
Attempting to remove the lens when at a large offset may cause damage to the lens assembly.
2.
Press “ ” on the built-in keypad or press “ ” on the remote control twice to turn off the projector after
cooling down.
3.
Remove the lens cover from the lens.
4.
Rotate the lens counter-clockwise to disengage it from
the lens mount.
5.
Remove the lens out of the lens mount.
6.
With the label “TOP” on the lens assembly facing up,
