—
49
—
DLP Projector — Owner’s Manual
RS232 by Telnet Function
Besides projector connected to RS232 interface with “Hyper-Terminal” communication by dedicated
RS232 command control, there is alternative RS232 command control way, so called “RS232 by TELNET”
for LAN/RJ45 interface.
Quick Start-Guide for “RS232 by TELNET”
Check and get the IP-Address on OSD of the projector.
Make sure that laptop/PC can access the web-page of the projector.
Make sure that “Windows Firewall” setting to be disabled in case of “TELNET” function filtering out by
laptop/PC.
Start
→
All Programs
→
Accessories
→
Command Prompt
Input the command format like the below:
telnet ttt.xxx.yyy.zzz 3023
(the
Enter
button is pressed)
(
ttt.xxx.yyy.zzz
: IP-Address of the projector)
If Telnet-Connection ready, and user can have RS232 command input, then press the
Enter
button, the
RS232 command will be workable.