Eiki EK-812U, Owner'S Manual

Page: 46 / 84

—
30
—
DLP Projector — Owner’s Manual
Picture Menu
Press the Menu button to open the OSD menu. Press the arrow keys (
pq
) to select PICTURE and press
the Enter button to enter the PICTURE menu. Press the arrow keys (
pq
) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (
pqtu
) to select or adjust the
desired settings and press the Enter button to confirm.
Display Mode
Save to User
Wall Color
Dynamic Range
Brightness
Contrast
Sharpness
Color
PICTURE
OUTPUT
SETUP
OPTION
PICTURE
Bright
Off
50
50
8
50
I
tem
D
escrIptIon
Display Mode Optimize the projector for displaying images under certain conditions, such
as Presentation, Bright, Movie, HDR, sRGB, DICOM SIM., Blending, 2D
High Speed, User (user-definable preset), and 3D.
Save to User Save the current picture settings in user profile, including brightness,
contrast, color, tint, color space, HSG adjustment and so on.
Wall Color Select a similar color to the wall color from the preset six colors, such as
Blackboard, Light Yellow, Light Green, Light Blue, Pink, and Gray. Select
Off to disable the function.
Dynamic Range Configure the High Dynamic Range (HDR) setting and its effect when
displaying video from 4K Blu-ray players and streaming devices.
Brightness Adjust the intensity of the image.
Contrast Adjust the degree of difference between the lightest and darkest parts of
the picture and change the amount of black and white in the image.
Sharpness Select the edge clarity of the image.
Color Adjust a video image from black and white to fully saturated color. The color
setting applies to video sources only.
Tint Adjust the red-green color balance in the image of video images. The tint
setting applies to video sources only.
Phase Analog signals only. Adjust pixel phase when the image still shows shimmer
or noise after pixel tracking is optimized. Pixel phase can adjust the phase
of the pixel-sampling clock relative to the incoming signal.
Horz Position Move the image right or left within the area of available pixels.
Vert Position Move the image up or down within the area of available pixels.
Auto Image Force the projector to reacquire and lock to the input signal. This is useful
when signal quality is marginal.
3D Display Configure the 3D display settings. See “3D Display Menu” on page 31.
HSG Adjustment Configure the color management settings. See “HSG Adjustment Menu” on
page 32.
Advanced Configure the advanced image settings. See “Advanced Menu” on page 33.