—
48
—
DLP Projector — Owner’s Manual
9.
After getting into
LAN
, input the following:
•
DHCP: Off
•
IP Address: 10.10.10.10
•
Subnet Mask: 255.255.255.0
•
Default Gateway: 0.0.0.0
10.
Select the
Apply
→
Yes
to confirm the settings, and then wait until finished.
11.
Open a web browser (for example, Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher).
In the Address bar, input the IP address: 10.10.10.10.
12.
Press the
Enter
/ ► button.
The projector is setup for remote management. On the first page of the web interface, you can find
projector’s model name, serial number, power level, power mode, system temperature, network
configuration, and firmware version information. To configure projector settings, click on the respective
menu on the left side of the interface.
Warping & Blending function
The Warping & Blending application software and its manual can be downloaded from EIKI website.
URL:
https://global.eiki.com
