Eiki EIP-3500, Service Manual, Page: 39 / 84

39
EIP-3500
Checking the peripheral circuits
of the formatter
What is the screen problem?
The rainbow-like screen is
displayed. Each color (R,
G and B) does not match.
The problem remains
even after adjusting
"Process menu", "DLP"
and "Index".
IC9003 and IC9004 are
defective.
Check the main PWB
and power unit.
IC9301 or its peripheral
circuits are defective.
Check the color wheel
sensor PWB.
IC9301 or its peripheral
circuits are defective.
IC9301 or its
peripheral circuits are
The screen is all black.
Other
Thick and white
vertical lines (flash).
Is the socket of
SC9001 connected
properly?
Does the color wheel
rotate?
Is the proper voltage
supplied to the socket
of SC9001?
Is the voltage of the
positive polarity pin of
C9308 normal (+5V)?
IC9101, 9102, their
peripheral circuits or
color wheel is defective.
Does the lamp turn on?
When no signal is sent, is
a pulse signal of 180Hz
present on pin (2) of
P1705 on the main PWB?
Is the voltage of pin (9)
of IC9301 normal
(b23 and
+26V)?
Is the voltage of pin
(13) of IC9301 normal
(-26V)?
Is the voltage of pin
(49) of IC9301 normal
(+7V)?
Is there a pulse signal
of 60MHz at TP9055
(DCLK_L)?
Is the socket of
SC9001 connected
properly?
Is the voltage of pin (3)
of IC9001 normal
(+2.5V)?
Is there a sine wave of
400MHz at pins (18)
and (20) of IC9001?
IC9003, IC9004,
IC9006 or their
peripheral circuits are
defective.
Does the fan rotate?
Is the pulse-shaped
waveform supplied to
the pin (14) of P1707
on the main PWB?
Check the ballast unit
and power unit.
Are contact terminals
of DMD, the formatter
board and CLGA
dirty?
Reinstall DMD, optical
mechanism, and
Formatter PWB.
IC9001 or its
peripheral circuits are
defective.
Check the fan circuits.
IC2003, 1701 or their
peripheral circuits are
defective.
YES
NO
NO
YES
YES
NO
YES
YES
NO
YES
NO
YES
YES
YES
NO
NO
NO
NO
NO
YES
YES
YES
NO
YES
NO
YES