EIJKELKAMP AM-100 Aquameter Instruction Manual Download | Manualshive

Page: 2 / 64

background image

Aquameter

™

Series Instruction Manual

10401-00188 Rev M

PROPRIETARY NOTICE

The information disclosed within this document or separately supplied in furtherance of this
document includes proprietary rights of Aquaread Ltd. Neither this document nor the
information disclosed herein or of a supplementary nature shall be reproduced or transferred
to other documents or used for any other purposes, except as specifically authorised in
writing by Aquaread Ltd. Copyright 2011 Aquaread Ltd. All rights reserved.

SOFTWARE LICENCE AGREEMENT

By using the Aquameter, its associated probes and PC based software (AquaLink),
you agree to be bound by the terms and conditions of the following software licence
agreement. Please read this agreement carefully.

Aquaread Ltd grants you a limited license to use the software embedded in the devices (the “Software”) in
binary executable form in the normal operation of the products. Title, ownership rights and intellectual
property rights in and to the Software remain in Aquaread Ltd.

You acknowledge that the Software is the property of Aquaread Ltd and is protected under British copyright
laws and international copyright treaties. You further acknowledge that the structure, organisation and code
of the Software are valuable trade secrets of Aquaread Ltd.

You agree not to decompile, dissemble, modify, reverse assemble, reverse engineer or reduce to human
readable form the Software or any part thereof or create any derivative works based on the Software.

RECYCLING

Any product bearing this symbol must be handed over to an applicable collection point for the
recycling of electrical and electronic equipment. By ensuring this product is disposed of properly,
you will prevent possible adverse consequences for the environment which could be caused by
inappropriate waste handling.

Note: For return for recycling, please contact Aquaread Ltd for instructions on how to return end-of-life
equipment, accessories, and all auxiliary items for proper disposal.

WARNING

Favourable indications made by this equipment

do not guarantee

water is safe for human

or animal consumption. This equipment

can not

detect the presence of harmful bacteria or

toxins. If in doubt,

ALWAYS TREAT SUSPECT WATER PRIOR TO CONSUMPTION

. In

no event will Aquaread Ltd be liable for any incidental, special, indirect or
consequential damages, whether resulting from the use, misuse, miscalibration or
inability to use this equipment, or from defects in the equipment.

TRADEMARKS

Aquaread™, AquaPlus™, Aquameter™, Aquaprobe™, AquaLink™ and RapidCal™

are all trademarks of Aquaread Ltd.

Microsoft

®

, Windows

®

and Excel

®

are trademarks of Microsoft Corporation

GOOGLE™ is a trademark of Google, Inc. StablCal

®

is a trademark of the HACH company

Aquaread Ltd has no affiliation with Microsoft Corporation, Google, Inc. or HACH

© 2011 Aquaread Ltd.

www.aquaread.co.uk

Page 2 of 64

«
1
2
3
4
...
»

Summary of Contents for AM-100 Aquameter

































































Reviews:

No comments

Related manuals for AM-100 Aquameter

Brand: rainforest Pages: 2

Brand: ICS Pages: 2

Brand: CAISSON Pages: 5

Brand: Facom Pages: 42

Brand: Oceanic Pages: 152

Brand: Kaiterra Pages: 8

Brand: Kaiterra Pages: 12

Brand: A&D Pages: 39

Brand: YOSensi Pages: 3

Dusty Harp Pickup Series

Brand: Dusty Strings Pages: 5

Vigilantplant NFBU200-S Series

Brand: YOKOGAWA Pages: 24

Brand: horiba Pages: 117

Brand: Sequid Pages: 111

PLUS 3631 Series

Brand: insize Pages: 1

Brand: Datakom Pages: 28

Brand: CAS Corporation Pages: 20

Brand: Vega Pages: 24

Brand: Anritsu Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands