Fitting the EIB100MRF Module
To fit the EIB100MRF Module, first hold the flexible antenna and guide it into its
designated hole in the rear of the unit until about 2/3 of its length is inserted (Fig.
2a). Then, hold the module housing (Fig. 2b) & plug it into the Alarm, being careful
to align the pins and keeping them perpendicular to the base as the module is
inserted (Fig. 2c). Ensure the module is fully home, by checking that it is flush with
the surrounding Alarm housing (Fig. 2d).
5
Pin
Alignment
Pin
Alignment
Pin
Alignment
Figure 2a
Figure 2b
Figure 2c
Summary of Contents for EIB100MRF
Page 2: ......
Page 8: ...7 Figure 4 blue red green LED Figure 3 ...
Page 10: ...9 Figure 5b Figure 5c ...
