Check that the green light is on continuously to
indicate that mains power is present and that the
red light flashes every 40 seconds.
Frequent testing of the system is a requirement to
ensure its continued and safe operation. Guidelines
and best practices for testing are as follows:
1. After the system is installed.
2. Regularly (monthly testing is recommended).
3. After prolonged absence from the dwelling (e.g.
after holiday period).
4. After repair or servicing of any of the systems
elements or household electrical works.
5. After renovations to the house.
To test an individual Alarm press and hold the test
button until the horn sounds and the red light flashes.
This will ensure that the sensor, electronics and sounder are working.
To test the Ra system, press and hold the test button on one of the Alarms.
The blue LED from the EIB100MRF will illuminate for approximately 3.5 seconds.
Continue to hold the test button until all the Alarms in the system are sounding. This
will take between 20 to 45 seconds depending on the number of Alarms and their
locations in the system, e.g. a system with 12 Alarms may take up to 45 seconds for
them all to sound. Release the test button when the test is completed.
15
Testing the System
Summary of Contents for EIB100MRF
Page 2: ......
Page 8: ...7 Figure 4 blue red green LED Figure 3 ...
Page 10: ...9 Figure 5b Figure 5c ...
