IMPORTANT:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not
accept liability for any resulting defects or problems. Make sure the electrical connection is carried out
by qualified personnel. All electrical and mechanical connections have to be carried out according to
the European safety standards.
1.2. Further safety instructions
IMPORTANT!
Handle with the dangerous electric voltages carefully.
With this voltage there is the danger to get a life
After taken the device from a cold room to a warm room, it is not allowed to activate the device.
possible that thereby emerged condensed water damages the device.
it reached ambient temperature.
Make sure that the voltage which i
Don’t switch the device in short time intervals (e.g. in second cycle) on or off.
Keep away children and laymen off the device.
Health risk!
Don’t look directly into the light source. At certain circumstances it is
possible that some people get epileptic seizures. This is especial
individuals whose epilepsy was determined by a doctor.
1.3. Designated use
This device was developed for professional use on stages, in discos, theatres etc. The device is only
approved for a connection up to 230V 50/60 Hz AC voltage
Regular breaks during operation increase the lifetime of your device.
Avoid vibrations or any form of forceful im
device.
Make sure that the device is not exposed excessive heat, humidity or dust at th
Take care that no cables are lying around. You would endanger your own safety and also the safety of
a third party.
It is not allowed to operate or store the device in an environment in which spray water, rain, humidity
or fog is expected. Humidity or very high atmospheric humidity could reduce the isolation of the device
and could cause deathly electric shocks. If you use fog devices the device
direct smoke jet. There has to be a safety distance of at least
machine. Make sure that the saturation of the fog has to enable a visibility of at least 10m.
Do not operate the device during thunderstorms. Surge volt
device from the power supply during thunderstorms.
Surrounding objects or surfaces should not be in contact with the device.
The device has to be protected by a suitable safety
Make yourself familiar with the functions of the device before start
should not handle the device. The most cause of functional disorder is inappropriate handling.
4 / 8
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not
cept liability for any resulting defects or problems. Make sure the electrical connection is carried out
by qualified personnel. All electrical and mechanical connections have to be carried out according to
tructions
IMPORTANT!
Handle with the dangerous electric voltages carefully.
With this voltage there is the danger to get a life-threatening electric shock.
After taken the device from a cold room to a warm room, it is not allowed to activate the device.
possible that thereby emerged condensed water damages the device. Do not activate the device until
Make sure that the voltage which it is connected to does not exceed the specified values.
hort time intervals (e.g. in second cycle) on or off.
Keep away children and laymen off the device.
Don’t look directly into the light source. At certain circumstances it is
possible that some people get epileptic seizures. This is especial
individuals whose epilepsy was determined by a doctor.
This device was developed for professional use on stages, in discos, theatres etc. The device is only
approved for a connection up to 230V 50/60 Hz AC voltage.
breaks during operation increase the lifetime of your device.
or any form of forceful impact during the installation, the start-up or Operation
Make sure that the device is not exposed excessive heat, humidity or dust at the place of installat
Take care that no cables are lying around. You would endanger your own safety and also the safety of
It is not allowed to operate or store the device in an environment in which spray water, rain, humidity
xpected. Humidity or very high atmospheric humidity could reduce the isolation of the device
and could cause deathly electric shocks. If you use fog devices the device may not
direct smoke jet. There has to be a safety distance of at least 0.5m between this device and the fog
machine. Make sure that the saturation of the fog has to enable a visibility of at least 10m.
perate the device during thunderstorms. Surge voltages could destroy the device.
ply during thunderstorms.
Surrounding objects or surfaces should not be in contact with the device.
be protected by a suitable safety cord.
familiar with the functions of the device before start-up. People without the expe
hould not handle the device. The most cause of functional disorder is inappropriate handling.
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not
cept liability for any resulting defects or problems. Make sure the electrical connection is carried out
by qualified personnel. All electrical and mechanical connections have to be carried out according to
threatening electric shock.
After taken the device from a cold room to a warm room, it is not allowed to activate the device. It is
ctivate the device until
not exceed the specified values.
Don’t look directly into the light source. At certain circumstances it is
possible that some people get epileptic seizures. This is especially true for
This device was developed for professional use on stages, in discos, theatres etc. The device is only
or Operation of the
e place of installation.
Take care that no cables are lying around. You would endanger your own safety and also the safety of
It is not allowed to operate or store the device in an environment in which spray water, rain, humidity
xpected. Humidity or very high atmospheric humidity could reduce the isolation of the device
may not be exposed to a
0.5m between this device and the fog
machine. Make sure that the saturation of the fog has to enable a visibility of at least 10m.
ages could destroy the device. Unplug the
up. People without the experience
hould not handle the device. The most cause of functional disorder is inappropriate handling.
