Ehrgeiz airDMX, User Manual

Page: 9 / 36

Software Setup

Settings
7
Settings
AP Mode
 Default way to connect with the airdmx

airDMX box provides a WiFi access point
 check the WiFi connection settings in you iPad

connect to the WiFi access point “airdmx”

The needed passphrase is printed on the bottom of the airdmx box.
 For changing the SSID or Pass go to [Settings] – [AP Mode]

You could also change the Wireless channel here if needed.
Client Mode

Use this mode to connect the box as well as the iPad via an existing
WiFi network
 Connect your iPad to the box set to the AP Mode first

Go to [Settings] – [Client Mode]

Follow the instructions on the left side of the screen
Startup Mode

Go to [Settings] – [Startup Mode]
 You can choose which page to start from here

You can also choose to lock the editing of the button panel or lock the
option to leave the button panel without a passphrase you can choose.
 If you disabled some of the alerts or hints, you can recover them by
activating [Recover all Alerts]
Language Setting

Go to [Settings] – [Language Setting]

Choose your favorite language here from
o
English
o
German
o
Chinese
airDMX Firmware version

You can check the Firmware Version of your airDMX Box here.
 Only works if the Box is connected well.

Also an indicator whether the box is connected or not.
 Normally there is no need for a Firmware Update. If you experience
problems and think they could be solved by a Firmware Update, please
contact us at
support@ehrgeiz.com .
Reset
 Use a Paperclip or the SIM Tray opening tool of your iPad to push the
Reset Button on the back of the airDMX Box for at least 3 seconds

All Settings saved in the box will be reset to factory defaults (SSID,
Passphrase, Wi-Fi channel etc.)