The DRC 433 is equipped with an infrared transmitter, USB port and a charging socket on the top (1).
The OLED display (2) and the input keypad (3) are located on the front.
Figure 4 - Top side DRC 433
The infrared transmitter (1), the USB port (2) and the charging socket (3) are located on the top side.
Via the USB connection (2), weighing data can be transmitted to the PC and processed further. As long
as the DRC 433 is connected via the USB port, power is also supplied via this port.
The DRC 433 can be charged using the supplied power supply unit. Plug the power supply unit into the
socket, the internal spar plug fits into the charging socket (3) on the front of the DRC433 with reverse
polarity protection. The charging process is started automatically.
When the DRC 433 is switched on, a charging animation is shown in the display as long as the battery
is being charged. As soon as the battery is fully charged, the animation stops. The remote control can
also be charged when it is switched off.
