EHC eco SAVE, Installation Instructions Manual

Page: 8 / 12

8
MAXIMUM AVAILABLE POWER
Power Meter Setup
After the installation of the Power Meter is complete, Pair the device
with the gateway as follows:
1. From your Computer, Smart Phone or Tablet. Select the Device
icon.
2. Click +Add. An Orange LED on the
Gateway
will start to flash.
3. Now Press the Small button on the front of the Power Meter
with the paper clip provided. (short press)
4. The Power Meter Icon will appear on your display.
5. The Power Meter is now Paired.
Setting Maximum Power
You can set the maximum overall power that can be drawn from your property by selecting,
1. Devices.
2. Electricity Meter.
3. Edit.
4. Now set the maximum level. OK to save from Desktop Computers and Accept from Smart-
Phones & Tablets.
Status of the Power Meter LED
Not paired : LED off
Paired correctly : the LED flashes once every two and a half seconds.
Paired but lost : the LED flashes once every half a second. This happens when the SmartHome
Gateway is disconnected. Once communication with the Gateway becomes available, the Power
Meter will connect again automatically.