EHC eco SAVE, Installation Instructions Manual

Page: 6 / 12

6
ADD DEVICE - NAME - PRIORITISE - LOAD SHEDDING
1. From your Computer, Smart Phone or Tablet. Select the Devices icon . Within this section
you have options to Add Device - Name - Prioritise or Set the Maximum Power of the heating
system.
2. Click the Radiator Icon,
3. Click See Radiators.
4. Click on your New Radiator.
From a Desktop Computer click Edit to Name and if required select the Priority level. Click OK to
save. From Smart Phones or Tablets you will already be in the Edit screen, you can now Name and
if required select the Priority level of the Radiator. Accept to save
Priority:
The Radiators are set with “No Priority” by default. If you require to prioritise Radiators you can
select priority levels between 1-30.
The priority of each Radiator depends on 3 factors :
1. Temperature difference between the set point and the environment.
2. The value of the priority assigned to each Radiator. By default all Radiators start with no priority
level.
3. If a Radiator is already activated. An active Radiator has a higher priority than other Radiators.
Max System Power: (Load Shedding)
You can set the maximum power that can be drawn from the Radiator system by selecting,
1. Devices
2. Radiator Icon
3. Edit
4. Enable power limit
5. Set System maximum Power
6. OK to save from Desktop Computers and Accept from Smart-phones & Tablets.