EHC eco SAVE, Installation Instructions Manual

Page: 4 / 12

4
Register the eco SAVE Gateway online @ www.electric-heatingcompany.co.uk/download
1. Click on the Register Icon.
2. Enter a valid email address for your account.
3. Enter a Password and Confirm your Password.
4. Enter the Serial No (See 1 Below )
This Appears on the packaging and on the Gateway
5. Enter the Device ID (See 2 Below)
6. Enter your Location details:
(This will determine your Time Zone and weather forecast
from the Internet)
7. Once your data input is complete, “Click Register” In a few minutes you will receive a confirmation
e-mail. If this does not happen, check your SPAM folder.
8. Confirm the Link within your e-mail to activate
your account.
9. Connect the eco SAVE Smart Gateway to
your broadband router with the
Ethernet cable supplied.
10. Connect the Micro USB cable to the gateway
and to the power adapter
supplied.
11. Power the gateway.
When the eco SAVE Smart Gateway is first connected the device will try to communicate and link
with the server, you will see a sequence of LED’s blinking on the gateway.
Gateway LED Status
Green off, Orange flashing one second
: discovery status (device pairing).
Orange on, Green flashing 0.2 seconds: the router has not assigned an IP address to the gateway.
Orange on, Green flashing briefly every 5 seconds: the router has assigned an IP address to the
gateway correctly, but there is no communication with the server.
Orange on, alternating with green flashing briefly every 5 seconds : the Gateway has connected
to router correctly and has internet connection.
Note:
It is preferable to register the gateway before installing it. If it is registered after installation it may take a few minutes
to become accessible via the web, if you do not want to wait, disconnect and reconnect the power supply to the
gateway.
SETUP
1
1
2
2
REGISTER BACK TO LOGIN
Log
User (Email)
Password
Password confirmation
County
City
Home name
Country
Postcode
Serial number
Device ID
Login Termoweb
https://control2.termoweb.net/?newuser=true https