EGSW THE BUBBLER, Installation & Operation Manual

Page: 6 / 14

EGSW
Environmental Group Southwest
4
The Bubbler Installation and Operation Manual
WARNING
!
Dust or dust-like particulates caused by
power-sanding, sawing, grinding, drilling or any
other construction-like activities can contain
contaminants that are harmful to breathe.
Always use your air compressor in a well-
ventilated
and clean area.
Never breathe the air that comes directly out of the
air compressor or air hose. This air is not suitable
for
breathing.
Always wear approved safety equipment. When
performing dust-creating activities, securely wear
properly-fit face masks or respirators.
If you feel ill from breathing while operating your
air
compressor, stop and seek medical attention
immediately.
BREATHING RISK
WARNING
!
Flying objects can cause injury to the eyes, head
and
other parts of the body.
Air-powered equipment and power tools are
capable
of propelling items (metal chips, fasteners and
particulates) at high speed into the air and could
result in injury.
Always wear approved head and eye protection.
Never point the air stream at any part of your body,
or at another person or animal.
When operating the air compressor, make sure all
other people and animals maintain a safe distance.
Do not move the air compressor when the air tank
is
under pressure.
Never use the air hoses to pull or move the air
compressor.
FLYING OBJECTS
WARNING
!
Air compressor surfaces become hot during
operation.
DO NOT touch hot surfaces, because they can
cause
severe burns.
Do not touch the air compressor’s cylinder head.
During operation, the cooling fins of the cylinder
head and delivery pipe become hot.
Allow the air compressor to cool before touching
it.
DO NOT place a storage cover on the unit during
operation. Only place a cover on the air
compressor
after it has thoroughly cooled down.
HOT SURFACE
WARNING
!
Exercise caution when using pressurized air.
To prevent injury and for your general safety, only
use high-pressure hoses, fittings and couplings
designed for use with air compressors.
Inspect all hoses, fittings and couplings for leaks
and wear. When leaks and wear are detected, stop
use and replace those items immediately. Do not
repair.
Never leave pressurized air in the air tank when
performing maintenance.
Never leave the air compressor unattended with
the
power supply in use and the air hose connected.
EXPLOSION FIRE
SAFETY