EGSW THE BUBBLER, Installation & Operation Manual

Page: 9 / 14

EGSW
Environmental Group Southwest
7
The Bubbler Installation and Operation Manual
INSTALLATION
Carefully examine the shipping box(s) upon receipt to ensure that all components
are present and there is no apparent damage.
To get the best results and most efcient
performance, we recommend
the following:
Recommended Tools:
• Adjustable wrench
• Knife or box cutter
• scredwdrivers
• Portable drill
• 1/4" Driver attachment
Prior to Installation:
• Inspect wet well and remove any grease
or debris that may prevent lowering
of the diffuser to a suitable resting spot
on the oor of the wet well.
* In certain situations where your diffuser cannot penetrate the grease layer,
you will either need to pump the wet well down or treat with Micro-Solve
® .
Install the Compressor and Stand:
• The stand and compressor box should be mounted rst using the Tapcon
cement anchors.
* Compressor box and stand needs to be mounted near 115-volt single phase power source.