4. Lay the Sports Bar front tube and rear legs out on a non-abrasive surface. Using two people, attach the front Sports Bar tube to the
rear Sports Bar leg LHS using the M12x80mm screws as shown. Tighten to torque 20Nm. Repeat process for the other side of the
Sports Bar. Insert the grommets into the holes on the front Sports Bar tube as shown.
See Dia #4
.
Diagram #4
SB0013b
page 4 of 7
FORD FALCON UTE 2008 SPORTS BAR
20/01/10
6. Attach the foot gaskets to their correct Sports Bar foot as shown, ensuring the holes in the Sports Bar feet remain accessible. Repeat
process for the other side of the vehicle.
See Dia #6
.
Diagram #6
5. Remove the protective lining from all of the foot gaskets.
See Dia #5
.
Diagram #5
LHS SHOWN
LHS SHOWN
1
2
FRONT
TUBE
REAR LEG
LHS
LEG JOINER
LHS
FRONT
TUBE
GROMMET
M12x80 SCREW &
NYLON SPACER
NON-ABRASIVE
SURFACE
TORQUE 20Nm
FOOT GASKET
REAR RHS
REAR LEG
RHS
FRONT TUBE
FOOT GASKET
FRONT RHS
RHS SHOWN
FOOT GASKET
FRONT RHS
FOOT GASKET
REAR RHS
FOOT GASKET
FRONT LHS
FOOT GASKET
REAR LHS
