EGO SNT2100, Operator'S Manual

Page: 7 / 34

56V LITHIUM-ION CORDLESS BRUSHLESS SNOW BLOWER — SNT2100
7
◾ ◾
If the snow blower strikes a foreign object follow these steps:
1) Stop snow blower. Release the switch.
2) Remove the battery packs.
3) Inspect for damage.
4) Repair any damage before restarting and operating the snow blower.
◾ ◾
Store Idle Snow Blowers Indoors-When not in use, snow blowers should
be stored indoors in dry, looked-up place – out of reach of children.
◾ ◾
Maintain Snow Blowers with Care – Following instructions for lubricating and
changing accessories.
TRAINING
◾ ◾
Read, understand and follow all instructions on the machine and in the
manual(s) before operating this unit. Be thoroughly familiar with the controls and
the proper use of the equipment. Know how to stop the unit and disengage the
controls quickly.
◾ ◾
Never allow children to operate the equipment. Never allow adults to operate the
equipment without proper instruction.
◾ ◾
Keep the area of operation clear of all persons, particularly small children.
◾ ◾
Exercise caution to avoid slipping or falling, especially when operating the snow
blower in reverse.
PREPARATION
◾ ◾
Thoroughly inspect the area where the equipment is to be used and remove all
doormats, sleds, boards, wires, and other foreign objects.
◾ ◾
Do not operate the equipment without wearing adequate winter garments. Avoid
loose fittings, clothing that can get caught in moving parts. Wear footwear that
will improve footing on slippery surfaces.
◾ ◾
Never attempt to make any adjustments while the motor is running (except when
specifically recommended by manufacturer).
◾ ◾
Always wear safety glasses or eye shields during operation or while performing
an adjustment or repair to protect eyes from foreign objects that may be thrown
from the machine.