background image

56V LITHIUM-ION CORDLESS BRUSHLESS SNOW BLOWER — SNT2100

4

SAFETY SYMBOLS

The purpose of safety symbols is to attract your attention to possible dangers. The 
safety symbols and the explanations with them deserve your careful attention and 
understanding. The symbol warnings do not, by themselves, eliminate any danger. The 
instructions and warnings they give are no substitutes for proper accident prevention 
measures.

 WARNING:

 Be sure to read and understand all safety instructions in this 

Operator’s Manual, including all safety alert symbols such as “

DANGER

,” “

WARNING

,” 

and “

CAUTION

” before using this tool. Failure to follow all instructions listed below may 

result in electric shock, fire, and/or serious personal injury.

SYMBOL MEANING

 SAFETY ALERT SYMBOL:

 Indicates 

DANGER

WARNING

, or 

CAUTION

.  

May be used in conjunction with other symbols or pictographs. 

 WARNING:

 The operation of any power tools can result in 

foreign objects being thrown into your eyes, which can result in severe 
eye damage. Before beginning power tool operation, always wear 
safety goggles or safety glasses with side shields and a full face shield 
when needed. We recommend a Wide Vision Safety Mask for use over 
eyeglasses or standard safety glasses with side shields. Always use 
eye protection which is marked to comply with ANSI Z87.1.

Summary of Contents for SNT2100



































Reviews: