56V LITHIUM-ION CORDLESS BRUSHLESS SNOW BLOWER — SNT2100
18
TO ATTACH/DETACH THE BATTERY PACK
CHARGE BEFORE FIRST USE.
NOTE:
For best performance, we recommend for use with 2 x 4.0Ah batteries and
higher Ah arc lithium 56V batteries.
WARNING:
If any parts are broken or missing, do not attempt to attach the
battery packs to the snow blower or operate the snow blower until the broken or
missing parts are replaced. Failure to do so could result in serious injury.
1. The battery cover is hinged. Raise the battery cover by lifting the front of the
cover.
2. The snow blower is equipped with two battery compartments, which can contain
two battery packs at the same time.
3. Align the grooves in the battery pack
with the raised ribs in either battery
compartment, and then insert the
battery pack into the compartment
(Fig. 11).
4. Push the battery pack until you hear
a “click”. The battery-release button
will spring up when the battery pack
is securely attached.
5. Go on inserting the other battery
pack into the spare battery
compartment in the same way.
6. To detach the battery pack, depress
the battery-release button to release
the battery pack, and then lift it out
of the compartment (Fig. 12).
7. Close the battery cover.
NOTICE:
Make sure that the latch on the
snow blower snaps into place and that the battery packs are secured to the unit before
starting operation.
11
Battery Install
Battery-
Release
Button
Battery
Compartment
Battery Cover
12
Battery Removal
2
1
Summary of Contents for SNT2100
Page 34: ......
