25
en
LED flashes or lights up red:
An error has occurred! (see section troubleshooting pointers)
Troubleshooting pointers
Status indicator lights up in red:
Communication to the remote station is disrupted. Check
to ensure the connection is correct!
Are the terminal resistors of the remote station correct
(only RS485)?
Is the remote station set to the correct interface
parameters?
Status indicator flashes red:
A severe error has occurred.
Please disconnect the unit from the mains and then switch it
back on again around 5 seconds later. If the error recurs,
disconnect the device from the network and notify the relevant
service technician or installer.
Notice at types of hot water tanks
The EGO Smart Heater 29.65335.xxx is suitable for installation
in enamelled hot water tank and hot water tank made of
stainless steel, if the quality of the stainless steel consists of at
least 1.4401.
Water hardness and quality
The lifetime of EGO Smart Heater and hot water tank depends
among other things on the hardness of the water. Calcium
deposits on the tubes heater can reduce the life of the EGO
Smart Heater.
We therefore recommend the use of EGO Smart Heater a
water hardness up to 14°dH (middle). At higher water
hardness, water softener systems are recommended.
Summary of Contents for Smart Heater
Page 79: ...79 pt...