1 5
en
Application scope
This document applies to the EGO Smart Heater types
No. 29.6x335.0xx (RS485 interface) as well as
29.6x335.1xx (LAN interface) for communication with a
remote station.
Installation pointers
The EGO Smart Heater must only be installed by
specialist technicians with the following qualifications:
Authorized
specialist
for
installation
and
commissioning
Training in electrical risks and customary safety
regulations
Knowledge of applicable standards and guidelines for
installation
Knowledge of and compliance with this document and
all safety instructions.
Intended use
The EGO Smart Heater is a screwin heater controlled by
a communication interface to heat up water and aqueous
solutions (e.g. hot water storage).
The EGO Smart Heater is suitable to optimise the own
power consumption by converting electrical energy, for
example from the photovoltaic system, into thermal
energy.
The output of the EGO Smart Heater can be adjusted
within the range 0W to 3500W in 500W steps.
Summary of Contents for Smart Heater
Page 79: ...79 pt...