background image

12-VOLT LITHIUM-ION GRASS/SHRUB SHEAR — CHT2000E

EN

 

č

Use only with the battery packs and chargers listed 
below:

BATTERY PACK

CHARGER

CBA0240

CCH0450E

 

č

Do not try to grasp or remove trimmings when the 
product is running. 

 

č

Only remove trimmings when the product is switched 
off and remove the battery pack.

 

č

Always be sure of a safe and secure operating position, 
whilst using the product. Always be sure of your footing 
when using steps and when using your product. 

 

č

Do not overload the product.

 

č

Check immediately if the product starts to vibrate 
abnormally. Excessive vibration can cause injury.

 

č

Follow the maintenance and repair instructions for 
this product. Never carry out any modifications of the 
product. Information about maintenance and repair is 
provided in this user manual.

 

č

Use the product only in daylight or good artificial light. 

 

č

Switch on the motor only when the hands and feet are 
away from the cutting device.

 

č

Always remove the battery pack.

whenever leaving the product unattended

before clearing a blockage

before checking, cleaning or working on the product 

after striking a foreign object

whenever the product starts vibrating abnormally 

 

č

Take care against injury to feet and hands from the 
cutting device.

 

č

Always ensure that the air vents are kept clear of 
debris.

 

č

Never allow people unfamiliar with these instructions 
or children to use the product. Local regulations can 
restrict the age of the operator.

 

č

Never operate the product while people, especially 
children, or pets are nearby.

 

č

Wear eye protection and stout shoes at all times while 
operating the product.

 

č

Inspect and maintain the product regularly. Have the 
product repaired only by an authorized person.

 

č

When not in use, store the product out of the reach of 
children.

 

č

Only use the battery pack provided with the appliance.

 

č

Keep supply and extension cords away from cutting 
means.

 

č

Never operate the machine with damaged guards or 
shields or without guards or shields in place.

 

č

Use only the manufacturer’s recommended 
replacement parts and accessories

 

č

This appliance is not intended for use by persons 
(including children) with reduced physical, sensory 
or mental capabilities, or lack of experience and 
knowledge, unless they have been given supervision 
or instruction concerning use of the appliance by a 
person responsible for their safety. Children should be 
supervised to ensure that they do not play with the 
appliance.

 WARNING: 

This machine produces an 

electromagnetic field during operation. This field 
may under some circumstances interfere with active 
or passive medical implants. To reduce the risk of 
serious or fatal injury, we recommend persons with 
medical implants to consult their physician and the 
medical implant manufacturer before operating this 
machine.

BATTERY/BATTERY CHARGER SAFETY WARNINGS

 

č

Protect the battery charger from rain and moisture. The 
penetration of water in a battery charger increases the 
risk of electric shock.

 

č

Pecharge only with the charger specified by the 
manufacturer. A charger that is suitable for one type of 
battery pack may create a risk of fire when used with 
another battery pack.

 

č

Do not charge other batteries. The battery charger is 
sutitable only for charging  lithiumion bateries within 
the listed boltage range. Therwise there is danger, fire 
and explosion.

 

č

Keep the battery clean. Contanmination may cause the 
danger of electric shock.

 

č

Check the battery charger, cable and plug each 
time before using. Do not use the battery charger 
when defects are detected. Do not open the battery 
charger yourself and have it repaired only by qualified 
personnel using original spare parts. Damaged battery 
chargers, cables and plugs increase the risk of electric 
shock.

 

č

Do not operate the battery charger on easily 
inflammable surfaces(e.g. paper,textiles,etc.)or in 
combusible environments. There is danger of fire due 
to the heating of the battery charger during charging.

1

6

Summary of Contents for CHT2000E

























Reviews: