4.3.5 Automatic log out
If a user does not perform any actions for a longer period,
he will be automatically logged out. You can adjust this time.
1.
In the configuration interface, open the page
System /
User.
2.
In the section
Session
enter the number of seconds, after
which a user is logged out at
Timeout
.
3.
Click on
Save
to apply your changes.
4.4 Configuration of alerts
In chapter 4.1.2 'Configuration of the temperature probe',
you have already started with the configuration of the
temperature sensor. This part covers the configuration of
sensor alerts.
4.4.1 Dead-band
To avoid repeated alerts, you can set a dead-band for alerts,
which are triggered on exceeding a threshold.
This value specifies the number of units, that the measured
value has to move back into the direction of the normal
status, after a threshold was exceeded, before another alert
is triggered.
Please refer to the following image:
Configuration
17
