17
1
2
3
4
5
6
7
SEVEN-BUTTON FOOTSWITCH
1, 2, 3) CHANNELS/MIDRANGE: This group of
three footswitch buttons and toggle switches allows
you to select the CHANNEL plus preset the MAS-
TER MIDRANGE feature to automatically turn on
when that channel is selected. Obviously, push the
button that corresponds to the desired CHANNEL
to activate that channel. Also, set the MASTER
MIDRANGE assign switch to ON if you want the
MASTER MIDRANGE section to turn on with the
channel.
NOTE: You can “override” the preset MIDRANGE
manually with the MASTER MIDRANGE push-
button (5) “on the fly” while on the active channel.
When you leave that channel and return, the preset
MASTER MIDRANGE will once again turn on,
unless you physically set the mini toggle switch to
OFF.
4) LOOP: This pushbutton is used to turn the ef-
fects loop on/off. The loop can also be preset to
come on with any or all channels using the mini
toggle switches above the pushbutton. To preset
the loop to come on with the channels, simply set
the appropriate mini toggles to the up position (as
shown above) and the loop will automatically come
on with that channel. Of course, even in the “pre-
set” mode, you can manually turn the loop on and
off with the pushbutton.
5) MASTER MIDRANGE: Gives you the option
of turning the MASTER MIDRANGE section on/
off “on the fly” or to override the MASTER MID-
RANGE circuit when preset to a CHANNEL.
6) REVERB: Use this footswitch to turn the RE-
VERB on/off. This is a global function and is not
“programmable” per channel. Of course, you can
use the three individual REVERB LEVEL
knobs on the rear panel of the head to preset the
reverb on each channel separately.
7) ISP DECIMATOR
TM
: This pushbutton lets you
turn the patented ISP DECIMATOR
TM
G-STRING
noise reduction system on/off. This is a “global”
function so it is NOT presetable per channel. When
the LED is on, the DECIMATOR
TM
is automatically
active on both CHANNEL 2 and CHANNEL 3. The
DECIMATOR
TM
does not function on CHANNEL 1
as it is really not typically needed on a clean channel.
The last cool thing about the Armageddon pedal is
that it connects to the amp using a standard 3 pin
XLR type microphone cable.
