Egholm Park Ranger 2150, Operator'S Manual

Page: 25 / 68

25
2
3
4
1
Operator’s Manual Park Ranger 2150 Operator’s Manual Park Ranger 2150
1.9 Removable load carrier (optional)
Removing the load carrier
A) Move the locking handle to “released” position.
To do this, pull the handle out firmly while turning
it to the right.
B) Pull the load carrier towards the back.
(Picture 1)
Fitting the load carrier
A) Fit the load carrier from the rear of the Park
Ranger 2150. Push it into place so that it is seated
in the locking handle on the frame. (Picture 2)
B) Pull the locking handle out and turn it to the
left while the load carrier is pushed into position.
(Picture 3)
C) Make sure that the locking handle is locked in
position in the locking eye. Pull the load carrier to
make sure that it is locked in position.
(Picture 4)
Load carrier Locking handle
Locking eye Locking handle
Locking handle in “released” position
Locking handle in “locked” position
General information