Egholm Park Ranger 2150, Operator'S Manual

Page: 27 / 68

27
1
1
2 3 4 5
Operator’s Manual Park Ranger 2150 Operator’s Manual Park Ranger 2150
1.10 Driver’s seat - continued
Mechanical suspension GRAMMER
(Picture 1)
Weight adjustment:
Turn the handle positioned in front of the seat clockwise
to load or anticlockwise to unload.
Correct adjustment is reached when the seat height is
taken to half the travel of the suspension.
(Picture 1), handle 2
Height adjustment:
It restricts the travel of the suspension upwards.
Adjustment is carried out while the operator is seated so
that the seat is loaded
The seat height can be adjusted upward in 3 steps by
turning the height adjustment knob.
(Picture 1), handle 3
Longitudinal adjustment:
Move the adjustment handle upwards to unlock the
guides.
When adjustment is completed, ensure that the handle
“clicks” and locks the guides.
Check that the seat does not move longitudinally.
(Picture 1), handle 1
Lumbar support:
Set and reset by turning the knob a quarter.
(Picture 1), handle 5
Backrest angel adjustment:
Pull the red straps upwards to unlock the backrest
When adjustment is completed, ensure that the handle
“clicks” and locks the backrest. (Picture 1), pos.4
General information