61760V04-2012-09
Seite / Page 17 von / of 28
1 General information
The duplicating unit egger EDG 1 was designed for the melting and stocking of duplicating materi-
als.
The egger EDG 1 is an efficient, compact duplicating unit with a powerful agitator, automatic regis-
tration of the melting cycles and a possible timer function.
The filling of the unit can arbitrarily vary between 2 kg and 5 kg, depending on the requirements. A
micro controller with 3 temperature sensors controls all functions of the unit. Quick and gentle heat-
ing up, quick cooling down and keeping constant the duplicating material. Easy handling and
maintenance.
2 Safety regulations
2.1 Appropriate use
The duplicating unit EDG 1 serves for the preparation of duplicating materials in otoplastic laborato-
ries. It is specified for all gelatinous duplicating materials that can be melted. The melting phase,
the cooling down and the constant operating temperature are controlled through a micro proces-
sor. If the unit is not used properly, any warranty and liability claims become extinct!
2.2 Risks and dangers
1.
The unit shall only be used at a socket with protective grounding with the voltage indicated on
the type plate. All security rules for the handling of electric devices must be complied. Only operate
the unit at a dry location and do not dip it into liquids.
2.
Ensure that there is always sufficient ventilation. The openings of the ventilation must be freely
accessible (minimum distance 15 cm). The air stream of the ventilator must be able to escape
freely. Do not direct the air stream to persons. The unit is not to be installed (heat accumulation).
3.
Except the seals which are accessible from outside, the unit has no parts that must be main-
tained or adjusted by the user. The unit should only be opened by qualified persons. Unplug the unit
before you open it. Only use originals parts approved by the manufacturer. Interventions to the unit,
especially intentions to repair the unit, lead to the expiry of the warranty and the liability.
4.
Unplug the unit before you clean and service it, especially for work done in the area of the agita-
tor. The agitator is ground and very powerful. Disregarding this advice could cause serious injuries.
5.
Replace the power cord completely if it is damaged. Do not keep on working. Do not unplug the
unit by pulling the power cord.
6.
Do not use solvents for cleaning the unit.
