7
2. Put the flange spreader into the flange if the separation of the flange is the same or bigger
that the maximum thickness of the tip of the wedge (7mm).
3. When the flange spreader is situated in the flange, close the external drain valve of the pump.
4. Use the lever of the pump until to get the correct separation of the flange.
5. To get a biggest separation, put the safety blocks in the flange and then put the stepped
blocks in the flange spreader.
NOTE
: Apply oil or polish to the wedge to get a best separation of the flange and prevent
damages in the flange and wedge.
7mm
Connect the pump to the flange spreader
Put the flange spreader in the flange
Closet he external drain valve of the pump
Use the lever of the pump until to get the
correct separation of the flange
Put the safety blocks to the flange and open the external
drain valve to remove the flange spreader
With the flange spreader are supplied two stepped block:
