9
It is advisable to use two flange spreaders to get a uniform separation of the flange. For this,
the flange spreaders must be situated opposite each other:
SOLUTION TO POSSIBLE MALFUNCTION
a) The piston does not advance:
- Close the external drain valve completely.
- Check the oil level.
b) There are no pressure in the system:
- Check for leaks or the connections are tight perfectly.
c) The piston does not go backwards or it not goes backwards completely.
- Open the external drain valve.
- Check the level oil. Remove oil if there is a lot inside the system.
NOTES
IMPORTANT!
The maker will not take responsibility for damage or malfunction as a result of the Testing
Pump being incorrectly used or, applied for a purpose for which it was not intended.
GUARANTEE
The maker guarantees to the machine owner 12 months against any manufacture defect.
This guarantee does not cover the parts wich are consumables.
Note: to apply the guarantee it is necesary to send the “GUARANTEE CERTIFICATE” duly
filled within one week after purchased the machine to the maker.
