OPERATION INSTRUCTIONS
How to operate the Electric Bicycle
To turn on the flow of electricity to the bike’s electrical system, toggle the “RED” Switch on the battery
to “1”. To turn off the flow of electricity to the bike, toggle the “RED” switch on the battery to “0”.
The Electric bicycle can be operated in 3 different modes:
1. Manual Mode (Level 0) –
•
Turn on the electrical system to the electric bike by depressing and hold the “Mode” button
on the handlebar controller for 2 seconds. Depress the “Down” button until the display
reads “0”.
•
In this mode, the pedal assist is off
•
In this mode, the throttle is still active (or “ON”) and will go up to 20mph
•
The motor will stop if the brake lever is depressed even if your throttle is still depressed.
2a. Pedal Assist Mode (Level 1, 2 and 3) –
•
Turn on the electrical system to the electric bike by depressing and hold the “Mode” button
on the handlebar controller for 2 seconds. Ride the bicycle normally as you would any
bicycle.
•
The motor will stop if the brake lever is depressed even if you are still pedaling the bicycle.
•
The motor will stop when you stop pedaling in this mode.
•
To put your bike in pedal assist mode 1, 2 or 3, turn on your bike's electrical system and
then use the up/down button on the handlebar controller to pick the desired pedal assist
level.
•
In Pedal assist mode level 1, the system will provide you with the most “miles per charge”
with the battery in use among the pedal assist modes. This is the most power efficient way
to ride your ebike with the motor switched on.
•
In Pedal assist mode level 2, the system will provide you with moderate to high “miles per
charge” of battery power use among the pedal assist modes. This is the second most
power efficient way to ride your ebike with the motor switched on.
•
In Pedal assist mode level 3, the system will provide you with moderate “miles per charge”
of battery power use among the pedal assist modes. This is the third most power efficient
way to ride your ebike with the motor switched on.
2b.Pedal Assist Mode (Level 4 and 5) –
•
Turn on the electrical system to the electric bike by depressing and hold the “Mode” button
on the handlebar controller for 2 seconds. Ride the bicycle normally as you would any
bicycle.
•
The motor will stop if the brake lever is depressed even if you are still pedaling the bicycle.
•
The motor will stop when you stop pedaling in this mode.
•
To put your bike in pedal assist mode 4 or 5, turn on your bike's electrical system and then
use the up/down button on the left handlebar control to pick the desired pedal assist level.
•
! CAUTION: This mode is designed to achieve a speed of >20 MPH. User discretion is
advised
•
In Pedal assist mode level 4, the system will provide you with the low amount of “miles per
charge” with the battery in use among the pedal assist modes. This mode will provide you
with speeds on pedal assist over 20mph. User
•
In Pedal assist mode level 5, the system will provide you with the least amount of “miles per
3
