Effigis CPAT FLEX Operation Manual Download Page 26

26

CPAT FLEX

 Operation Manual (ITX2)

A.5 ITX2 Transmission Compliance Summary

The ITX2’s operating frequency of 6.78 MHz falls within an ISM band, and complies to the 
following FCC and ISED requirements for license free transmission:

REGULATION

DESCRIPTION

COMPLIANCE

FCC 47 CFR Part 15 Subpart C, 
§15.207(a)

Conducted limits for intentional 
radiators connected to public utility 
(AC) power line

NOT APPLICABLE - The ITX2 is 
battery powered

FCC 47 CFR Part 15 Subpart C, 
§15.209

Maximum radiated emission limit 
of 29.5 dBμV/m @ 30 meters (or 
69.5dBμV/m @ 3 meters)

COMPLIANT - Measured radiated 
emission limit of 67.02 dBμV/m 
@3 meters

FCC 47 CFR Part 18 Subpart C, 
§18.301

Equipment frequency tolerance of 
±15 kHz at 6.78 MHz

COMPLIANT - Measured bandwidth 
of 20.72 kHz, i.e., ±10.36 kHz

FCC 47 CFR Part 18 Subpart C, 
§18.305

Maximum field strength limit of 
25 μV/m @ 300 meters for misc. 
equipment (or 108 dBμV/m @ 3 
meters)

COMPLIANT - Measured radiated 
emission limit 67.02 dBμV/m @ 3 
meters

ISED RSS-210, Issue 10, Annex 
B, article B.5 (a)

Maximum field strength limit of 
84 dBμV/m @ 30 meters (or 124 
dBμV/m @ 3 meters)

COMPLIANT - Measured Radiated 
emission limit 67.02 dBμV/m @ 3 
meters

ISED RSS-210, Issue 10, article 
B.5 (a) and ISED RSSGEN, Issue 
5, article 6.7

Maximum bandwidth of 30 kHz 
(6.795MHz - 6.765MHz = 30 kHz)

COMPLIANT - Measured bandwidth 
of 20.72 kHz

ISED RSS-210, Issue 10, Annex 
B, article B.5 (b)

Carrier frequency stability shall 
bemaintained to ±0.01% (±100 
ppm)

COMPLIANT - All test scenarios saw 
offsets within ±100 ppm, with a 
maximum offset of 9.9218 ppm

ISED RSS-GEN, Issue 5, article 
8.8

AC power lines conducted emission 
limits

NOT APPLICABLE - The ITX2 is 
battery powered

Appendix B – Our Services

Effigis offers a portfolio of services to deploy and support purchased equipment through its 
Customer Support organization. Customer Support is standard with every product sale and 
consists of business hour technical assistance, in-warranty repair and calibration.

B.1 Customer Support

Customer Support is accompanied with the sale of every Effigis product. Customer Support 
services include:
 

- Product and Service Literature

 

- Technical Assistance (Business Hour)

Summary of Contents for CPAT FLEX

































Reviews: