effenne Inova, Instructions For Use Manual, Page: 19 / 78

6 Vacuum packing in MAGIC VAC ® Family containers
Multipurpose containers ideal for storage of frequently
used products such as dry and fragile foods; powder
foodstuffs; fresh, pureed or strained fruit and vegetables.
Their transparency and design makes them attractive to
display on kitchen shelves while ensuring that their con-
tents are clearly visible.
- Fill the container leaving at least 3 cm of room between
the contents and upper rim and position the cap on the
container.
- Connect the container lid to the air inlet (4) of the appli-
ance (fig. N) by means of the connection hose (13) .
- Lock the lid (2) by pushing the LOCK buttons (5); the
machine will carry out a vacuum packing cycle and
turn off automatically on its completion.
- Remove the hose from the container lid.
- Press the central button
(14) to open the containers
(fig. N).
7 Vacuum packing in glass jars sealed with metal caps
(Leifheit type)
Use the large-sized cap attachment to pack foods in
large-mouthed glass jars with a metal cap. A small-sized
cap attachment is also available for narrow-mouthed jars
sealed with metal caps.
- Fill the container leaving at least 3 cm of room between
the contents and upper rim.
- Connect the cap attachment (15) to the air inlet (4) of
the appliance by means of the connection hose (13) .
Place the cap attachment directly on the jar with the
metal cap only
(16) and press down, making sure it fits
correctly. (fig. O)
- Lock the lid (2) by pushing the LOCK buttons (5) ; the
machine will carry out a vacuum packing cycle and
turn off automatically on its completion. Make sure
that the cap attachment holds firmly by keeping it
pressed with your hand.
- Disconnect the hose from the cap attachment. Remove
the cap attachment from the jar.
- Apply the ring (17) supplied with the jar and screw it
down all the way (fig. O).
- To open a glass jar vacuum-sealed with a metal cap,
use the cap opener provided (the side with writing
should be turned up). Position the cap opener as
shown in figure P and gently pry open the cap until the
vacuum is released. Remove the metal cap. This
accessory allows you to reuse the cap.
8 Vacuum packing with MAGIC VAC ® bottle caps
The MAGIC VAC
®
Bottle Cap may be used to seal partly
filled bottles of wine or non-fizzy beverages. Using the
Bottle Cap will allow you to create a vacuum inside the
bottle so as to slow down oxidisation and preserve the
freshness and flavour of its contents for a longer time.
17
OPERATING INSTRUCTIONS
- By means of the connection hose (13) connect the air
inlet (4) of the appliance to the MAGIC VAC ® Bottle Cap
(18) (fig. Q). Press the Cap firmly into the bottle.
- Lock the lid (2) by pushing the LOCK buttons (5) ; the
machine will carry out a vacuum packing cycle and
turn off automatically on its completion.
- Disconnect the hose from both the Bottle Cap and the
appliance immediately.
- To open a bottle sealed with the MAGIC VAC ® Bottle
Cap, simply pull the cap out of the bottle. You will hear
the air rushing into the bottle.
9 Vacuum packing with the cap attachment in MAGIC
VAC
®
Executive containers or in containers sealed with
MAGIC VAC ® Universal Caps with the previous model of
knob
To use the Cap Attachment in MAGIC VAC ®
Executive con-
tainers or in containers sealed with MAGIC VAC ® Universal
Caps with the previous model of knob, read the instruc-
tions supplied in our web page
www.flaemnuova.it
Warning: Do not store the machine with the LOCK buttons engaged