UPS: MKD 700
– 3000 VA RT (XL)
Introduction
The purpose of an EPO connection is for emergency power off and the
release of the loads.
2.8
Operation
Only qualified personnel are permitted to access and operate the device.
In all situations, it must be kept in mind that the UPS includes an energy storage
or is connected to an external energy storage unit. This means that the UPS
outlet can be current-carrying even when the UPS has already been
disconnected from the mains power supply.
Consequently, the UPS output is guaranteed to be de-energized only when the
device has completely shut down and has been disconnected from the mains
power supply.
2.9
Working with accumulators
When handling accumulators, there is always a risk of electric shock, burns
and/or chemical burns.
For this reason, unauthorized personnel should not have access to
accumulators.
Accumulators or their current points can cause electric shock.
In the event of a short-circuit of the accumulators, touching the current-carrying
parts can result in severe burns.
Do not place accumulators in the vicinity of heat sources and do not bring them
into contact with open fire. Explosion hazard!
Accumulators should never be opened or destroyed. The electrolyte released
presents a great danger to your health and the environment. It could result in
chemical burns to skin and eyes; moreover, the electrolyte is very toxic.