Effekta ES2200, Operating Manual

Page: 23 / 84

Photovoltaic Solar Inverter Series ES Assembly
ES series 23
4. Assembly
Before starting the assembly of the photovoltaic solar inverter, take note
of Chapter 2, Safety instructions.
4.1 Assembly of the wall mounting
Before starting the assembly of the photovoltaic solar inverter, take note
of load bearing capacity of the wall.
There is a requirement for a load bearing capacity of at least 300 kg/m
3
.
Plasterboard or metal stud partition walls are not sufficient.
Dimensions for wall mounting
Fig. 4-1 - 1 Wall mounting for photovoltaic solar inverter ES2200 / ES3300