2 / Introduction and Specifications
The ValveMate 7040 provides easy adjustment of valve output for maximum
end-user convenience and efficiency. Designed for use with the 781S
Series spray valves, the ValveMate 7040 features an adjustable nozzle air-
flow regulator and a microprocessor-based timed air-pressure output for
controlling valve ON time. The ValveMate 7040 is simple to use and will
operate many millions of cycles without maintenance.
Introduction
Note:
Specifications and technical
details are subject to engineering
changes without prior notification.
Size:
19 cm W x 14 cm D x 7 cm H (7.5” W x 5.6” D x 2.7” H)
Weight:
1.4 kg (3.1 lb)
Cabinet:
Aluminum
Input Voltage:
Selectable 100/120/220 VAC
Internal Voltage:
24 VDC
Feedback Circuits:
5 to 24 VDC NC solid-state switch 250mA maximum
Initiate Circuit:
5 to 24 VDC signal or contact closure
Air Input:
70 psi (4.8 bar)
Cycle Rate:
Exceeds 600 per minute
Time Range:
.001 to 99.9 seconds
Meets CE standards.
Specifications
The small size and adjustable mounting bracket allow for positioning of the
ValveMate close to the point of valve operation and provide convenient
access to setup and dispensing adjustment controls.
“On the fly” time adjustment allows adjustment of valve output while the
equipment is running. This feature eliminates the need to shut down parent
machinery to change or adjust dispense time settings.
Other features and explanations of controls are detailed in the diagrams on
pages 4 and 5.