www.efd-inc.com [email protected]
USA & Canada 800.556.3484 44 (0) 1582 666334 Asia & China: +86 (21) 3866 9006
Sales and service of EFD
®
dispensing systems are available worldwide.
7
Action in the Event of a Malfunction
If a system or any equipment in a system malfunctions, shut off the system immediately and perform the
following steps:
•
Disconnect and lock out system electrical power. If using hydraulic and pneumatic shutoff valves, close
and relieve pressure.
•
Identify the reason for the malfunction and correct it before restarting the system.
•
For EFD air-powered dispensers, remove the syringe barrel from the adapter assembly. For EFD
electro-mechanical dispensers, slowly unscrew the barrel retainer and remove the barrel from the
actuator.
Disposal
Dispose of equipment and materials used in operation and servicing according to local codes.
EFD
Product
Safety
Statement
RoHS标准相关声明
(China RoHS Hazardous Material Declaration)
产品名称 有害物质及元素
Part Name
Toxic or Hazardous Substances and Elements
铅
汞
镉
六价铬
多溴联苯
多溴联苯醚
Lead
Mercury
Cadmium
Hexavalent
Polybrominated
Polybrominated
Chromium
Biphenyls
Diphenyl Ethers
(Pb)
(Hg)
(Cd)
(Cr6)
(PBB)
(PBDE)
金属转接头
X
O
O
O
O
O
All Brass Fittings
O:
表示该产品所含有的危险成分或有害物质含量依照EIP-A, EIP-B, EIP-C
的标准低于SJ/T11363-2006 限定要求。
O:
Indicates that this toxic or hazardous substance contained in all the homogeneous materials for this part,
according to EIP-A, EIP-B, EIP-C is below the limit requirement in SJ/T11363-2006.
X:
表示该产品所含有的危险成分或有害物质含量依照EIP-A, EIP-B, EIP-C
的标准高于SJ/T11363-2006 限定要求.
X:
Indicates that this toxic or hazardous substance contained in all the homogeneous materials for this part,
according to EIP-A, EIP-B, EIP-C is above the limit requirement in SJ/T11363-2006.
Important Safety Information
All EFD disposable components, including syringe barrels, cartridges, pistons, tip caps, end caps, and
dispense tips, are precision engineered for one-time use. Attempting to clean and re-use components
will compromise dispensing accuracy and may increase the risk of personal injury.
Always wear appropriate protective equipment and clothing suitable for your dispensing application.
•
Do not exceed maximum operating pressure of 100 psi (7.0kg/cm2).
•
Do not heat syringe barrels or cartridges to a temperature greater than 100°F (38°C).
•
Dispose of components according to local regulations after one-time use.
•
Do not clean components with strong solvents (e.g. MEK, Acetone, THF).
•
Cartridge retainer systems and barrel loaders should be cleaned with mild detergents only.
•
To prevent fluid waste, use EFD SmoothFlow
TM
pistons.
