EFA Z 10 D, Operating Instructions Manual

Page: 3 / 21

EFA breastbone cutter Z 10 D Translation of the operating instructions
EN
V 05.2021 1 of 21
Table of contents
1 Introduction and general information ______________________________________________________ 2
1.1 Information on the operating instructions ______________________________________________________ 2
1.2 User group _____________________________________________________________________________ 2
1.3 Scope of supply __________________________________________________________________________ 3
1.4 Intended use ____________________________________________________________________________ 3
1.5 Claims for defects, liability, warranty __________________________________________________________ 4
2 Safety ______________________________________________________________________________ 6
2.1 Safety instructions ________________________________________________________________________ 6
2.1.1 Other safety signs __________________________________________________________________ 7
2.1.2 Warning signs _____________________________________________________________________ 7
2.1.3 Mandatory instruction signs ___________________________________________________________ 7
2.1.4 Prohibition sign ____________________________________________________________________ 8
2.2 Personal protective equipment ______________________________________________________________ 8
2.3 Conduct at the workplace __________________________________________________________________ 8
3 Technical description __________________________________________________________________ 9
3.1 Dimensions ____________________________________________________________________________ 10
3.2 Nameplate _____________________________________________________________________________ 10
4 Transport and storage ________________________________________________________________ 11
5 Connection and start-up ______________________________________________________________ 12
5.1 Initial start-up ___________________________________________________________________________ 12
5.1.1 Spring balancer ___________________________________________________________________ 13
5.1.2 Oil mist lubricator __________________________________________________________________ 14
6 Handling ___________________________________________________________________________ 15
6.1 Switch operation ________________________________________________________________________ 15
6.1.1 Switching on _____________________________________________________________________ 15
6.1.2 Switching off _____________________________________________________________________ 15
6.2 Working with the cutter ___________________________________________________________________ 15
6.2.1 Operation________________________________________________________________________ 15
6.2.2 Operational safety _________________________________________________________________ 15
7 Service and maintenance _____________________________________________________________ 16
7.1 Daily cleaning after completion of the slaughtering ______________________________________________ 16
7.2 Daily maintenance of the cutter _____________________________________________________________ 16
7.2.1 Lubrication _______________________________________________________________________ 16
7.2.2 Blade play _______________________________________________________________________ 17
7.3 Extended maintenance (after about 100 operating hours) ________________________________________ 17
7.3.1 Oil mist lubricator __________________________________________________________________ 17
7.3.2 Sharpening the blades _____________________________________________________________ 17
7.3.3 Repair by customer service __________________________________________________________ 17
7.3.4 Return __________________________________________________________________________ 17
8 Waste disposal
– recycling ____________________________________________________________ 18
8.1 Disassembly and disposal _________________________________________________________________ 18