EFA Z 10 D, Operating Instructions Manual

Page: 10 / 21

EFA breastbone cutter Z 10 D Translation of the operating instructions
EN
V 05.2021 8 of 21
2.1.4 Prohibition sign
Symbol Meaning
General prohibition sign!
The red signal border/prohibition stripe indicates an immediate danger and is overlaid diagonally over the
self-explanatory symbol. The general prohibition sign must always be used in conjunction with another
sign.
2.2 Personal protective equipment
Some work requires protective equipment.
This protective equipment must be made available to the operator.
Lifecycle phase Protective equipment
Transport

Protective gloves

Safety shoes
Assembly, start-up &
maintenance

Protective gloves

Safety shoes

Protective goggles

Hairnet for long hair
Operation

Hairnet for long hair

Cut-resistant gloves

Protective goggles

Hearing protection

Safety shoes

Protective clothing
Storage

Protective gloves

Safety shoes
Disposal

Protective gloves

Safety shoes
2.3 Conduct at the workplace
The workplaces must be designed in such a way that each employee has at least 1.5 m² of freedom of
movement. No other workplace should protrude into this area, otherwise there is an injury hazard due to the
actions carried out with the EFA cutter.
Ensure proper lighting of the workplace (at least 500 lux).
The floor must minimise the danger of slipping on wet, greasy or dirty surfaces.
The workplace must comply with local hygiene and workplace regulations.

Keep your workplace tidy and in good working condition. A cluttered or messy workplace can lead to
accidents.

Take environmental influences into account.

Keep other persons away from your workplace. Focus on the job in hand when working.

Do not use the EFA breastbone cutter when you are tired and/or unfocused.

Blade changes as well as installation, maintenance and repair work are only allowed to be carried out on
devices that have been disconnected from the pressure generating unit on the input side and the
associated hoses.

Avoid wearing loosely fitting items of clothing and jewellery that can be caught by moving parts. Wear
sturdy shoes during your work. Always wear a hairnet!

Ensure that your workplace has a correct, ergonomic set-up and make sure that you are standing
securely.

Lead the connecting lines of the cutter upwards to avoid creating a tripping hazard.

Store the cutter in a safe manner. Look after your tools with care. Use only sharp and undamaged blades
so that you can work better and more safely.

Do not leave any tool keys connected. Check that all keys have been removed before switching on.

Look after your equipment with care. Use only sharp and undamaged blades for safe work.

Only use genuine EFA accessories/spare parts.
The use of other equipment, accessories or spare parts can endanger you and other persons.
Non-compliance will void the warranty.