EFA breastbone cutter Z 10 D
Translation of the operating instructions
EN
V 05.2021
2 of 21
1
Introduction and general information
Important!
Operating instructions
cannot prevent misuse in
every case!
1.1
Information on the operating instructions
These operating instructions are part of the technical documentation of the machine and comply with the
Machinery Directive.
The machine has been designed and built according to the careful selection of the harmonising standards to
be observed as well as other technical specifications.
The operating instructions are intended to describe the operation and handling of the
EFA breastbone cutter
Z 10 D
and provide the necessary safety instructions.
These operating instructions are intended for the machine operator and contain the details of the intended use
and important information:
for safe handling of the machine,
for maintenance,
for cleaning.
If the instructions are followed, the EFA cutter will be operated safely, properly and economically and its
operational capability will be maintained.
Observance of these instructions helps to avoid dangers, minimise repair costs and downtimes, and increase
the reliability and service life of the machine.
A prerequisite for safe handling and trouble-free operation of the machine is observance of the following:
the operating instructions,
the company directives (safety signs and danger warnings),
the legal provisions on occupational safety,
the applicable laws and regulations.
These operating instructions must always be kept accessible at the machine for all work to be carried out.
Note!
If the existing operating instructions have been damaged or lost, you can request a
replacement by stating: machine designation, part number, serial number and year of
production,
see section 3.2 Nameplate
.
If you have any questions, or if you cannot solve a problem with the help of these operating instructions,
please contact our Service department.
1.2
User group
Only instructed and/or trained personnel over 16 years of age are allowed to set up or operate the EFA cutter.
Furthermore, it is imperative that everyone working with and on the machine has read and understood the
operating instructions, and observes them.
Instructed person
Persons over 16 years of age who have been instructed and trained by a qualified person (specialist) in the
tasks assigned to them and about possible dangers in the event of improper behaviour, as well as in the
handling of the necessary protective devices and protective measures, are considered to be instructed
persons.
