Edwards nES Series, Instruction Manual, Page: 35 / 56

▪ For pumps with a single-phase motor, the pump should be connected to a
standard wall socket, a 16 A rated protection is necessary (fuse or breaker). The
motor has a "Klixon" overload protection element which looks like a red push
button that must be manually reset after an overload trip. The delivery includes a
C13 plug but no power cable. If the C13 plug is wired to a purpose-made power
cable, this must be done by an electrically certified staff. Check acceptable voltage
and frequency on the pump nameplate before use.
▪ Additional safety devices are available as options including an oil pump
temperature switch.
Figure 21 Electrical connections
1. Switch 0/1 2. Junction box
3. Thermal protection Klixon 4. Socket CE1320 C14
1. Switch 0/1 2. Junction box
3. Thermal protection Klixon 4. Socket CE1320 C14
4.4 Pictographs
Figure 22 Pictographs
1. Rotation direction of the fan 2. Shock hazard
3. Hot surface
1. Rotation direction of the fan 2. Shock hazard
3. Hot surface
07/2020 - Page 31
A35104880_B - Installation