© Edwards Limited 2007. All rights reserved.
Page 31
Edwards and the Edwards logo are trademarks of Edwards Limited.
Maintenance
A344-02-880 Issue J
5.8
Clean the oil-level sight-glass
Figure 11 - Oil-level sight-glass assembly
for the item numbers in brackets.
1. Drain the oil as described in
2. Undo the eight screws (3) and remove the bezel (4), the sight-glass (2) and the sight-glass seal (1) from the
oil-box (5).
3. Clean the screws, bezel and sight-glass with a suitable cleaning solution.
4. Wipe the sight-glass seal with a clean, dry, lint-free cloth.
5. Wipe the sight-glass recess in the oil-box with the cloth.
6. Refit the sight-glass seal, sight-glass and bezel and secure with the eight screws.
7. Refill the pump with oil as described in
8. Check that the sight-glass does not leak.
4
2
3
1
5
AA/5009/A
1. Sight-glass seal
2. Sight-glass
3. Screws (8 off M6 x20)
4. Bezel
5. Oil-box
Summary of Contents for E1M40
Page 2: ......
