© Edwards Limited 2009. All rights reserved.
Page 7
Edwards and the Edwards logo are trademarks of Edwards Limited.
OPERATION
D141-32-880 Issue A
4
OPERATION
4.1
Getting started
Ensure that the batteries are fitted in accordance with the procedure detailed in
When the GasCheck G3 is switched on a number of screens are displayed before the unit is ready to detect leaks.
Refer to
Figure 4 - Screens displayed during GasCheck G3 startup
WARNING
Do not use the GasCheck G3 in safety critical applications.
WARNING
Do not use the GasCheck G3 in potentially explosive atmospheres. The GasCheck G3 is not
intrinsically safe.
Displays the gas with which the GasCheck G3
has been calibrated with.
Displays the instrument serial number and the
firmware version.
Indicates that the GasCheck G3 is zeroing the
input signal.
