4. Select three (3) standard size wash buckets and fill them each with
one gallon of normal tap water (
distilled or de-ionized treated
water is recommended as a final rinse
if water is extremely
hard in your area
).
5. Add 1/8 cup of Ivory dishwashing liquid to the first bucket of
water and allow it to mix thoroughly, then place one dirty alarm
into the soap water mixture until it becomes completely cov-
ered or submerged.
NOTE: If the alarms are exceptionally dirty, you may wish to
first wipe off any excess dirt before washing alarm so as not to
dirty the wash water too quickly.
DO NOT open alarm for cleaning.
WARNING: ONLY IVORY DISHWASHING LIQUID IS TO BE
USED. OTHER BRANDS ARE NOT RECOMMENDED
AND MAY CAUSE YOUR ALARM TO MALFUNCTION.
6. Allow alarm to soak for approximately 10 minutes (longer if ex-
tremely dirty). Then agitate for 5 or 10 seconds to flush out any
remaining dirt left inside alarms housing.
7. Remove alarm from wash water and transfer directly to one of
the first rinse buckets containing clear water. Again, allow alarm
to become completely submerged, agitate once more for 5 or
10 seconds to remove soap residue.
8. Finally, transfer alarm to your second and final rinse bucket,
repeating method found in Step 7, then remove alarm to a
clean dry area for a period of 48 hours to allow it to thoroughly
dry.
WARNING: SMOKE ALARMS ARE TO BE AIR DRIED ONLY.
DO NOT PLACE ALARM IN OVEN, MICROWAVE OR USE A HOT
AIR BLOWER TO ACCELERATE DRYING TIME. THIS COULD
RESULT IN DAMAGE TO YOUR SMOKE ALARM.
IMPORTANT: IT IS RECOMMENDED TO CHANGE WASH AND RINSE
WATER AFTER FIVE (5) ALARMS. IF YOUR ALARMS ARE EX-
TREMELY DIRTY, WATER SHOULD BE CHANGED MORE FRE-
QUENTLY.
In the event you experience difficulty in the cleaning of your smoke
alarm or if you have any questions, please contact Edwards or
your local Edwards distributor.
WARNING:
If the smoke alarm does not work properly, do not try and fix it
yourself. This will void your warranty. DO NOT TRY TO FIX IT
YOURSELF.
IMPORTANT: Edwards recommends alarms be tested a mini-
mum of once a week.
WARNING: Never use an open flame of any kind to test your
alarm. You may ignite and damage the alarm as well as your
home. The test feature accurately simulates smoke conditions
and tests the alarms functions as required by Underwriters Labo-
ratories.
WARNING: Do not cover, tape, or otherwise block the open-
ings of your smoke alarm. These openings are designed to allow
air to pass through your smoke alarm, thus sampling the air around
the alarm.
FAILURE TO REGULARLY CLEAN THIS SMOKE ALARM WILL
RESULT IN FALSE ALARMS. A BUILD UP OF DUST CREATES
AN OBSCURATION THAT SIMULATES SMOKE. THIS MEANS
THE UNIT WILL GO INTO ALARM WITHOUT A FIRE CONDI-
TION.
LIMITED WARRANTY
Providing Purchaser or Distributor notifies us promptly if within two (2) years from date of
shipment from Edwards Company, equipment or parts manufactured by us fail to function
properly under normal use because of defects in material or workmanship demonstrated
to our satisfaction to have existed at the time of delivery or because examination proves
them not to be operating within the specified limit of calibration, the Company, reserving
the right to either inspect them in your hands or request their return to us, will at our
option repair or replace at our expense F.O.B. shipping point, such equipment or parts
determined by us to be defective, if returned transportation prepaid by Purchaser. Specific
products may carry a greater or lesser warranty but if so they will be so identified.
Replacement parts and factory repairs are warranted for a period of ninety (90) days from
date of shipment from the Edwards Company.
The foregoing shall not apply to equipment that shall have been altered or repaired after
shipment to you by anyone except our authorized employees or agents and the Company
will not be liable in any event for alterations or repairs except those made with its written
consent. Purchaser shall be solely responsible for determining suitability for use and the
Company shall in no event be liable in this respect. The equipment or parts manufactured
by others but furnished by us will be repaired or replaced only to the extent of the original
manufacturer's guarantee. No guarantee whatsoever is given as to electronic tubes, and
the Company shall have no repair or replacement obligations as to these. Our obligations
and liaibilities hereunder shall not be enforceable until such equipment has been fully paid
for. Purchaser agrees that if the products sold hereunder are resold by purchaser, he will
include in the contract for resale, provisions which limit recoveries against us in accordance
with this section. THE FOREGOING OBLIGATIONS ARE IN LIEU OF ALL OTHER OBLIGATIONS
AND LIABILITIES INCLUDING NEGLIGENCE AND ALL WARRANTIES OF MERCHANTABILITY
OR OTHERWISE, EXPRESS OR IMPLIED IN FACT OR BY LAW, AND STATE OUR ENTIRE AND
EXCLUSIVE LIABILITY AND BUYER'S EXCLUSIVE REMEDY FOR ANY CLAIM OF DAMAGES
AND IN CONNECTION WITH THE SALE OR FURNISHING OF GOODS OR PARTS, THEIR DESIGN,
SUITABILITY FOR USE, INSTALLATION OR OPERATION. WE WILL IN NO EVENT BE LIABLE
FOR ANY DIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES WHATSOEVER, AND OUR
LIABILITY UNDER NO CIRCUMSTANCES WILL EXCEED THE CONTRACT PRICE FOR THE
GOODS FOR WHICH LIABILITY IS CLAIMED.
Edwards Signaling
90 Fieldstone Court, Cheshire, CT 06410
Phone: 1-203-699-3300
