Edwards & Co Ed & Co FA005, Instruction Manual, Page: 7 / 9

Adjusting the shoulder belt height
There are three height slot positions for the shoulder straps. As
your child grows, you will need to move the straps according to
your child’s height.
IMPORTANT - The shoulder straps should be positioned so that
they sit level with your child’s shoulders. Diagram 1 shows the cor-
rect strap position.
To adjust the shoulder belt height:
1. Remove the ends of the shoulder straps from the metal splitter
plate behind the seat as shown in Diagram 2.
2. Pull the straps through to the front of the seat.
3. Re-insert the straps through the appropriate slots in the seat
shell and through the layers of cushioning as appropriate.
4. Re-attach the loops on the straps to the metal splitter plate.
Make sure the strap does not twist in any way.
IMPORTANT – Only use the top layer of insert cushioning when
the shoulder belts are in the lowest position.
IMPORTANT - Do not allow the harness straps to become
twisted as this may decrease the performance of the car seat in
the event of a crash. The straps should be flat against your child’s
body.
12
designed & printed in NZ
Installing the capsule to your stroller
1. Locate the two inbuilt travel adaptors on your stroller as
indicated in Diagram 1. Always make sure the parking brake is
engaged before fitting the capsule.
2. With the handle of the capsule in the ‘Handle up’ position and
it positioned in reverse facing position (with baby looking at
you), insert the capsule’s two male locking pieces into the
stroller’s two female travel adaptors as pictured in Diagram 1.
Check that both locks have been properly inserted.
3. On the capsule, squeeze the handle release button and move
the handle forwards into the ‘Handle lock’ position as pictured
in Diagram 2. This secures the connection and locks the
capsule to the stroller.
4. You should hear a
CLICK!
and see the handle locking indicator
(found on the side of the capsule’s handle) change to a green
colour. The handle position should match that in Diagram 2
(position 3).
IMPORTANT – the handle lock indicator must be green to ensure
the seat is safely locked into the stroller. Check that the capsule
cannot be removed before using the stroller.
IMPORTANT – always fit the capsule in the reverse facing position.
13
designed & printed in NZ
2. 1.1.