Edwards & Co Ed & Co FA005 Instruction Manual Download Page 2

GENERAL WARNINGS

To reduce the risk of 

SERIOUS INJURY 

or 

DEATH

, read this owner’s 

manual and your vehicle owner’s manual before installing and using 

this car seat.  By properly using this car seat and following these 

instructions (and the instructions that accompany your vehicle), 

you will greatly reduce the risk of serious injury or death to your 

child from a collision.

• 

NEVER LEAVE YOUR CHILD UNATTENDED IN THE CAR SEAT

• 

NEVER USE THE CAR SEAT IN A PASSENGER SEAT FITTED 

WITH AIRBAGS.

• 

NEVER

 use the car seat without fastening it into your vehicle.

• 

NEVER

 alter or modify the car seat in any way as this may 

affect its performance in the event of a collision.

•  The buckle 

SHOULD ALWAYS

 be easily accessible.  It is 

important that your child can be released quickly in the event of 

an emergency.

• 

This car seat is 

ONLY SUITABLE

 for cars fitted with a 3-point 

static or retractable seat belt that is approved to UN/ECE 

regulation No. 16 or other equivalent standards.

• 

ONLY FIT

 to a forward-facing passenger seat.  

NEVER

 fit into a 

rear-facing or side facing seat.

• 

The seat is suitable from birth up to 13kg (approximately 12-15 

months old).

• 

DISCARD

 the seat if it is involved in a serious collision 

EVEN

 if 

no damage is visible.

• 

The cover and fabrics of the seat are integral to its performance 

in the event of a collision.  

NEVER

 remove or replace the fabrics 

of the seat unless it has been approved by Edwards & Co.

•  Fit the harness firmly to the child.  A loose restraint or harness is 

DANGEROUS.

3

designed & printed in NZ

Hey there!

Firstly, thanks for choosing Edwards & Co - it truly means a lot to us 

that you have chosen one of our seats to keep your family safe.

A lot of time and money is spent ensuring that your car seat is the 

safest it can be.  Our seats are rigorously crash tested and certified 

to the latest European safety standards in the Netherlands.  But to 

get the maximum safety from your car seat it is very important that 

you read this instruction manual carefully.  In particular, pay attention 

to the warnings included as well as the correct installation methods 

provided.  Subtle differences can make a huge difference when it 

comes to safety.

We believe in long lasting relationships with our customers, and we’d 

love you to keep in touch.  You can sign up for our website 

newsletter or follow us on Facebook.  And remember that if you 

need anything we’re a simple phone call or email away. 

 

Enjoy your product, and remember to read this manual carefully!

Regards

Mark 

Edwards 

    Warwick 

Edwards

WEB - edwardsandcobaby.com

FB - facebook.com/edwardsandcobaby/

Introduction

designed & printed in NZ

Summary of Contents for Ed & Co FA005










Reviews: