Deutronic Elektronik GmbH
Deutronicstr. 5, D - 84166 Adlkofen
Tel.: +49 8707 920-0
Fax: +49 8707 1004
E-Mail: [email protected]
http://www.deutronic.com
D-IBM2900
Stand: 08.03.2022
Seite 5 von 25
General applicable safety notes
Use eye protection
Observe handling
instructions
Use hand protection
Intended Use
This product is exclusively intended for the product description in this chapter. Each further
use is not intended and Deutronic does not assume liability for the damages incurred by
this. The risk is borne solely by the user/operator.
Mounting and Installation
-
Wear your personal protection equipment
-
Mounting and installation of the product only by qualified personnel.
-
Mains/DC cables may only be used completely unrolled to guarantee a sufficient
cooling!
-
Ensure a safe locking of the plug connectors to guarantee operational safety and
avoid damages. In case of wear, the cable must be replaced immediately!
-
Disconnecting the plug connection during use is prohibited.
-
The devices may only installed in locations that meet the climatic and technical
conditions specified by Deutronic (see technical data). D
-
Deutronic is not liable for damage caused by improper handling or incorrect
installation.
-
Only carry out works on parts of the device when it is switched off.
-
Protect from direct sunlight.
-
Protect from heat sources.
-
The device must be protected from water and humidity. Water penetration damages
the battery.
-
The device must be mounted in such a way that an operation is possible and the
device status can be read by the user.
-
If the operating position is wrong, there is risk of injury from tipping.
-
It is forbidden to change the device mechanically such as drilling holes to attach
additional mounting points.
-
Any modification to the device can lead to life-threatening operating conditions or
fire.